Burley Tools 35300, User Manual, Page: 30 / 33

U
živatelská příručka k elektrickému míchadlu
35300
Page 30 of 33
the work to be performed. Use of the power tool for operations different from intended could result in
a hazardoussituation.
g) Wear ear protectors. Exposure to noise can cause hearing loss.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
6) PRECAUTIONA ON USING MIXER
Attention! You must abide by the following basic safety measures against electrical shocks,
injuries and the danger of fire when using electric tools. Read and abide by these instructions before
you start to use any tools. These instructions must be kept in a safe place. You will also find other
safety instructions in the accompanying booklets.

The equipment must never be used in surroundings where an explosive atmosphere exists.
Never mix in solvents or substances containing solvent

Do not let the cable touch any parts of your body
 Only use the extension cable approved for use in the working area

The unit must only be started and stopped when it is inside a mixing vessel. Ensure that the
mixing vessel is placed on a solid, secure base

Never reach into the mixing vessel with your hands or any other object during the mixing
process

We recommend that you always wear industrial safety gloves and safety goggles when
working with the mixer

Wearing close-fitting clothes is mandatory

Always wear a dust mask
7) HOW TO USE THE MIXER
Before setting up, repair or maintenance of the appliance you must always turn off
the operating switch and pull out the mains plug!
Before Initial Operation
- Check if the rated frequency of the mains supply corresponds to the details of the type place.
- Before using the tool, read the instruction book carefully.
Paddle Assembly (Fig. 1):
In accordance with the type of mixer, first screw mixer part (6a) together with mixer part (6b). Screw
the mixer (6) into the output shaft (5) afterwards by using spanner (a) to hold the output shaft in
place(5) and then using the second spanner (b) to tighten up the mixer paddle(6). Proceed in the
reverse sequence to undo the mixer.
The paddle’s shape could be different and not necessary the same as above picture shows.