Burley Tools 35300, User Manual, Page: 28 / 33

U
živatelská příručka k elektrickému míchadlu
35300
Page 28 of 33
4. SAFETY INSTRUCTIONS
The following pictograms appear throughout these operating instructions:
Indicates danger of injury, risk to life and possible damage to the appliance if
these instructions are not followed.
Indicates the presence of electrical current.
Read through these operating instructions carefully before using the appliance. Become familiar with
the functions and method of operation. To ensure proper operation, always maintain the appliance
according to the instructions. The operating instructions and associated documents should always be
kept close to the appliance.
When using power tools, you must observe the following basic safety precautions in order to ensure
protection from electric shocks, injury and fire. Read and follow all the instructions before using this
power tool. Look after the notes on safety.
Always check if your mains voltage corresponds with the value on the type plate
The machine has been double-insulated in accordance with EN60745
USE CORRECT SUPPLY VOLTAGE: The power supply voltage must match the information quoted
on the tools identification plate.
USE PROPER EXTENSION CORD: Only use an approved extension cable that is suitable for the
machine's power. When the extension cable is on a reel, unroll the cable in its entirety.
SWITCH OFF THE MACHINE IMMEDIATELY IN CASE OF:
1. Malfunction in the mains plug, power cable or damaging of cable.
2. Broken switch.
3. Smoke or stench of scorched insulation.
5. GENERAL SAFETY RULES
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.