8) Glue the top sill extension in place. To
blend the seam, apply automotive glazing
putty, then sand flush.
Glue .015 x .125" styrene in the groove
under the top sill.
Glue on the end ribs.
9) Glue the door to the car body.
For the lower door track, draw a reference line on the car
body, even with the bottom of the door. Then glue on the
door track supports, and glue a strip of .080 x .125" styrene to
the supports.
Make the upper door track out of .060 x .188" styrene and
.020 x .100" styrene.
Glue on the upper & lower door stops.
NOTE: the upper stop is two pieces.