Bürkert 8228 ELEMENT, Quick Start Manual, Page: 27 / 32

27
Operatingandcommissioning
Type 8228
icon meaning and alternatives
Sensor in good condition, fluid conductivity and fluid
temperature within the set ranges.
If the monitoring of the conductivity and/or the fluid tem-
perature and/or the fluid conductivity has been activated,
the alternative icons in this position are:
• , associated with :
• , associated with ERR :
The device is measuring.
The alternative icons in this position are:
•
HOLD
!
flashing: function HOLD is active
•
T
: running check that the outputs are working and
behaving correctly
"maintenance" message
"warning" message
ERR
"error" message
9.5 knowing the operating levels
The device has 2 operating levels: the Process level and the Con-
figuration level.
• When the device is powered up or the display module mounted
on the electronic module, the display indicates the software
version of the display module then it shows the first screen of the
Process level.
→
To browse in the Process level, see chap. 9.2.
• The Configuration level has 5 menus: „Param“, „Calib“, „Diag-
nostic“, „Test“, „Info“.
→
To access the Configuration level and to browse in the menus,
see chap. 9.2.
The access codes to the menus „Param“, „Calib“, „Diagnostic“ and
„Test“ are only required if they have been customized.
9.6 choosing the output wiring mode
→
From the Process level, access the Configuration level.
→
Access the menu "Param".
→
Go to the function "HWMode".
Param
This is
when the
device is be-
ing parame-
tered............
....................
This is
when the
device is be-
ing parame-
tered............
....................
Outputs HWMode
sink/NPN
source/PNP
→
Confirm the function "HWMode".
→
Choosing the wiring mode for all the outputs.
English