13
Maintenance, Troubleshooting
7.2
Installation of Type 6106 with Type
AC21 solenoid coil
Any installation position.
Preferably with solenoid system at the top.
→
Clean the pipelines.
→
Install a dirt trap upstream.
Observe the direction of flow!
→
Establish the fluidic connection.
→
Install.
Always connect the protective conductor!
7.3
Connection types
Rectangular plug
2 single wires
Cable plug
connector
8
MAInTEnAnCE,
trOuBleshOOting
8.1
Safety instructions
Warning
danger of explosion caused by electrostatic charge!
If there is a sudden discharge from electrostatically charged
devices or persons, there is a danger of explosion in the EX
area.
▶
Using suitable measures, ensure that no electrostatic
charges can occur in the EX area.
▶
Clean the device surface by gently wiping it with a damp or
anti-static cloth only.
risk of injury from improper servicing, repairs and
maintenance!
▶
The device may be serviced and maintained by authorized
technicians only and with the appropriate tools!
▶
The unit may be repaired by the manufacturer only!
8.2
Maintenance work
The devices are maintenance-free when operated under the con-
ditions described in this manual.
english
PTB 01 ATEX 2175
Summary of Contents for PTB 01 ATEX 2175
Page 15: ......
Page 16: ...www burkert com...
