12
Installation
6.3.7
Degree of protection
electrical connection
degree of protection
with matching plug
connector
Cable plug in accordance with EN
175301-803, form C
IP65
2 pressed-in single wires
-
Rectangular plug connection, 2-pole
IP20
7
installatiOn
7.1
Safety instructions
Danger
danger of explosion!
The device is a closed system. It must not be removed.
risk of electric shock!
▶
Before reaching into the device or the equipment, switch off
the power supply and secure to prevent reactivation!
▶
The connection lines of the electromagnets must be per-
manently installed in such a way that they are adequately
protected from mechanical damage.
▶
Observe applicable accident prevention and safety regula-
tions for electrical equipment!
Warning
danger – high pressure!
When reaching into the system, there is an acute risk of injury.
▶
Before dismounting pneumatic lines and valves, turn off the
pressure and vent the lines.
▶
During the installation, make certain the flow direction is
correct.
▶
Observe applicable accident prevention and safety regula-
tions for pressurized devices.
english
PTB 01 ATEX 2175
Summary of Contents for PTB 01 ATEX 2175
Page 15: ......
Page 16: ...www burkert com...
