E-20-
8205
pH CONTROLLER 8205
ENTER
ENTER
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
SPANOL
4 OPERATION
4.3 Calibration Mode: Press simultaneously for 5 seconds
The following adjustments are set in the calibration mode display:
ENTER
4.3.1 Language
The selected language is
confirmed by the ENTER key and
becomes immediately active.
English, German, French, Italian, or Spanish choice.
Temperature unit selection (
°
C;
°
F).
Adjustment of the 4...20 mA measuring range (pH or T
°
).
Selection of output signal 1 (impulse duration or frequency).
Selection of output signal 2 (impulse duration or frequency).
Adjustement of 2 setpoint for pH control (high/low or high/
very high;...).
CONTROLL
Selection of the pH control mode (P; PI; PID).
Adjustement of 2 alarm thresholds for pH or temperature
(high/low or high/ very high;...).
Manual operation selection.
Back to the operation mode and storage of new parameters.
Damping selection. 10 different steps available.
Selection of the temperature entry Pt1000 or Manual
(without Pt1000). Entry of the simulation value.
0......9
LANGUAGE
CURRENT
OUTPUT 1
OUTPUT 2
SETPOINT
ALARM
HAND
END
FILTER
T
°
UNIT
T
°
SENSOR
LANGUAGE
T
°
UNIT
