Burkert 8026, Quick Start Manual

Page: 31 / 100

31
Spare parts and accessories
SPARE PARTS AND 12.
ACCESSORIES
CAUTION
Risk of injury and/or material damage caused by the use of
unsuitable parts.
Incorrect accessories and unsuitable replacement parts may
cause injuries and damage the device and the surrounding area.
Use only original accessories and original replacement parts from •
Bürkert.
Spare part (only for the 8026 transmit-
ter) Order code
Set of 1 green seal in FKM + 1 black seal
in EPDM 552111
Holding ring 619205
Nut 619204
Accessory Order code
Display module 559168
Black capping cover, with seal 560948
M12, 5-pin female connector, to be wired 917116
M12, 5-pin female connector, moulded on
shielded cable (2 m) 438680
M12, 5-pin male connector, to be wired 560946
Accessory Order code
M12, 5-pin male connector, moulded on
shielded cable (2 m) 559177
PACKAGING, TRANSPORT, 13.
STORAGE
NOTE
Damage due to transport
Transport may damage an insufficiently protected device.
Transport the device in shock-resistant packaging and away from •
humidity and dirt.
Do not expose the device to temperatures that may exceed the
•
admissible storage temperature range.
Protect the electrical interfaces by using protection caps.
•
Poor storage can damage the device.
Store the device in a dry place away from dust. •
Storage temperature of the 8026: -10 to +60°C. •
Storage temperature of the SE36: -10 to +60°C. •
english
Type 8026 - 8036 - 8076