Burkert 323219, Quick Start Manual

Page: 36 / 41

36
Start-up
11.3 Set device with Bürkert
Communicator
All settings can be made on the device with Bürkert
Communicator.
You can find the settings in Bürkert Communicator in the
operating instructions.
11.3.1 Connecting the IO-Link device to the
Bürkert Communicator
Necessary components:
•
Communication software: Bürkert Communicator for PC
•
USB büS interface set (see accessories)
•
büS adapter for communication interface (see accessories)
•
A büS cable extension if necessary (see accessories)
→ To connect the IO-Link device to Bürkert Communicator,
unscrew the housing lid.
→ Insert the Micro USB plug into the communication interface.
→ Create the connection to the PC with the büS stick.
→
Start the Bürkert Communicator.
→ Configure settings.
LED 1
LED 2
DIP switch
Key 2
Key 1
Communication interface
Fig. 25: Description of operating elements
11.3.2 Connecting the büS device to the Bürkert
Communicator
Necessary components:
•
Communication software: Bürkert Communicator for PC
•
USB büS interface set (see accessories)
→
Make the connection to the PC with the USB büS interface
set.
→
Start the Bürkert Communicator.
→ Configure settings.
11.4 IO-Link
11.4.1 Information, IO-Link
IO-Link is an internationally standardised IO technology (IEC
61131-9) for communicating with sensors and actuators.
Type 8791 REV.2
english