Burkert 178 354, Operating Instructions Manual

Page: 27 / 89

8605 - 27
english
8.3.1 inp (input) - Selection of the input signal
Enter the type of standard signal used under this menu item. You can select
between the following standard signals:
0 ... 5 V
0 ... 10 V
0 ... 20 mA
4 ... 20 mA
Illustration 8-3: InP (Input) - Selection of the input
signal
8.3.2 Out (Output) - Valve settings
In this menu the electronics are adjusted to
the valve used and
the fluidic conditions in the application.
Absolutely vital are
the setting of the valve type in the sub-menu VALV and
the setting of the working range of the coil current in the sub-menu AdJ.
nOTe!
The modifications of the PWM control frequencies possible in the sub-
menu VAdJ compared with the default values defined with the selection of
the valve type are only necessary in special applications.
•
•
•
•