Plus-X 600 Installation and Operation Manual Rev B
5
Unpaired Relay Example
Plus-X 600 relay #1 is not paired and the ARC Plus has mapped the Plus-
X 600’s channels
starting at ARC Plus channel #1.
In this scenario, ARC Plus Channel 1 Raise uses Plus-X 600 relay #1, and ARC Plus Channel 7
Raise uses Plus-X 600 relay #7.
Relay Wiring
The Plus-
X 600 relays are organized into two 2x9 “Phoenix”
-type headers (four mating 9-pin
plugs are included). Pins for common, normally open and normally closed are indicated for each
relay.
1
2
3
4
5
6
C NO NC C NO NC C NO NC C NO NC C NO NC C NO NC
C NO NC C NO NC C NO NC C NO NC C NO NC C NO NC
7
8
9
10
11
12
Software Configuration
Now that the Plus-X 600 is installed on the network, you are ready to add the unit to the ARC
Plus using AutoLoad Plus. Please download AutoLoad Plus from www.burk.com if you have not
done so already.
Note: For more information on configuring channels on the ARC Plus, refer to the ARC Plus
Installation and Operation Manual.
Adding the Plus-X 600 to the ARC Plus
Adding a Plus-X device in AutoLoad Plus
