35
CALENDARS
You can schedule flowcharts to run at different calendar times.
Jet allows you to define multiple calendars. To add, remove or
edit a calendar, click Manage Calendars from the Tools menu in
Jet.
Note: Jet calendar times are always in standard time for the time zone configured on the PC.
RECORDABLE SPEECH INTERFACE (RSI)
Your ARC Solo is equipped with the RSI Recordable Speech Interface. You can take advantage of the dial-in and
dial-out capabilities to monitor and control your site from any phone. If you are familiar with the earlier ESI Plus
speech unit, you will find the RSI operates using the same familiar commands. Physically, the data access
arrangement (DAA) and transient protection are located on a separate field-replaceable card. There are several
enhancements, but the most noticeable is the ability to add custom vocabulary to the standard broadcast specific
list. This is covered in the
CUSTOM SPEECH
section.
CONFIGURING THE RSI
Before you can use the RSI for monitoring and control, some configuration steps are necessary. You must
specifically a
ssign channel and unit speech labels, greeting and goodbye messages; and passcodes for the users.
For alarm notification you will also need to set up the selective dial-out lists.
There are also default settings that you may adjust, such as number of rings before the ESI answers an incoming
call, the amount of time the RSI waits between phone numbers on the dial out list, etc. All of these may be edited
via web browser and are described fully in
RSI SETTINGS.
CALLING THE RSI
Calling in to the RSI allows you to monitor and control your ARC Solo if you have appropriate permissions. To place
a call to the RSI:
1.
Dial the phone number for the line connected to RSI. After the specified number of rings, the RSI will pick
up the line and speak the programmed greeting.
New
Calendar
Creates a new calendar.
Save
Saves changes made to the selected calendar.
Delete
Calendar
Deletes the selected calendar.
Calendar Select a calendar from the drop down list to display it in the editor.
Close
Closes the calendar editor.
Jet Calendar
