30
VERIFY FIRMWARE VERSION AND CONFIGURATION SETTINGS
Note: If the ARC Solo detects corruption in the on-board configuration data during the firmware update
process, it will restore affected settings to factory default values. This may include network configuration
settings.
1.
Open a browser and address the ARC Solo using its previously configured IP address or
hostname.
2.
If the system does not respond, repeat the access using the default hostname
ARCSOLO
,
with access credentials “
admin
” and “
password
”.
3.
Restore system configurations by selecting
System>Advanced>Restore configuration
.
4.
Check
Restore network settings
and
Restore User Settings.
5.
Browse to and select the MasterCfg.json file saved at the beginning of this procedure.
6.
Click
Restore
.
The message “Uploading configuration data. This may take some time…” will
be displayed.
7.
When the Restore successful dialog is displayed, click
OK
.
8.
Confirm that you can access the web page using the original network settings.
9.
Select
System>System Information
to confirm that the correct firmware revision is in
place.
