Bürk Mobatime K600, Operating Instructions Manual

Page: 28 / 128

Page 12
© BÜRK MOBATIME GmbH
8. Overview of the error messages
01
E01 (only K675) Swapped insertion of the time card Insert correct side of the card
.
02 Interference of the print head motor
Inform service
03 Interference of the cart intake (motor)
Inform service
E50 (only K675) The barcode of the encoded time card
cannot be read. Clean the barcode or use a
new card.
E51 (only K675) The time card was inserted 2 x at the same
time or there are already more than
6 stamps on the time card. Wait for 1 min. or use a new
card.
Caution
1. The device is intended for indoor use only. Do not set it up outdoors or where it is
exposed to rain, moisture, mechanical shock or vibrations, or close to radiators or in
dusty environments.
2. Only connect the device to a power source with the prescribed voltage.
3. Observe that no liquids or metal objects enter the device.
4. This device must not be operated with a damaged mains line or damaged plug or
after interference or any damage to the device.
5. Return to an approved customer service for examination, repair or setting of the
device.
6. Before renewed commissioning of the device, pull the plug from the socket and
have the device reviewed by qualified specialists.
7. For PLUGGABLE DEVICES, observe that a socket must be present in the proximity
of the device and easily accessible.
9. Technical data
Rated voltage 220-240V (110-120V) 50/60 Hz 0.22 A
Observe the voltage indication on the rating plate.
Power consumption 51 W
Ambience conditions 0°C to 40°C
Rel. humidity10%-80% (no condensation)
Dimensions H x W x D 22.5 x 19 x 10.5 cm
Weight 2.0 Kg
Data retention at mains failure Approx. 3 years by lithium battery CR 2450 TVB