42 | English
BURGcam LIGHT 3010
BURGcam LIGHT 3010
English | 43
Abb. 1.7-1
Abb. 1.7-2
1.7 Hold the displayed QR code
approx. 15-20cm in front of the
camera until a signal tone sounds.
Vary the distance if necessary.
A success message is displayed
after setup.
Note:
Adjust the brightness of your
smartphone according to the ambient
light so that the QR Code can be easily
recognised.
If login failed, please check the WIFI
signal strength and set the camera to
the default settings by holding down
the reset button for 8 seconds. Return
to the factory setting before repeating
the setup.
