36
I English
secuENTRY KeyApp - iOS
36
I English
Fig. 1
Fig. 3
Fig. 4
Fig. 2
Add BURGcam
Enter a name for the BURGCam
Enter the password for
your WLAN network
Press this button
Hold the displayed QR code approx.
15-20 cm in front of the camera until
a beep sounds. Vary the distance if
necessary. Then continue by pressing
the button
5.4.3 BURGcam units & assignments
Add BURGcam:
Switch on the BURGcam by connecting the power cable. The camera will emit an acoustic signal.
Fig. 1
Fig. 1
Fig. 2
Select BURGcam
Display unit information
The unit information is divided into the general unit information, the power management, the basic settings and the
PIR settings.
Display unit information:
secuENTRY KeyApp - iOS