Electrical
requirements
Check that the voltage on the
rating plate of your appliance
corresponds with your electricity
supply which must be A.C. (Alternating
Current).
If the socket outlets are not
suitable for the plug supplied with this
appliance, the plug should be removed
and the appropriate one fitted.
WARNING: The plug removed
from the mains lead, if severed,
must be destroyed as a plug with
bared flexible cord is hazardous if
engaged into a live socket outlet.
WARNING: This appliance must
be earthed.
Should the fuse in the 13A plug
require changing, a 13A BS 1362 fuse
must be fitted.
Features
⁄
Bread feed chute
¤
Crumb tray
‹
Element selection dial (for single
or double sided toasting)
›
Front toast eject chute.
fi
Shade selection / speed control
fl
Power on indicator
‡
Control panel cover
·
Control panel cover security nut.
Back
‚
Rear toast eject chute
3
4
Assembling your
toaster
Crumb tray
WARNING: Ensure your toaster is
disconnected at the main power
supply and has cooled down
before attaching or removing
the crumb tray.
1
To attach the crumb tray insert on
top of the rail on of the toasting
tray.
2
Push all the way in until the tray
reaches the back and the front of
the tray sits flush with the front of
the unit.
IMPORTANT: To avoid debris entering
the unit and causing damage
always operate the toaster with
crumb tray installed.
Eject chute
Your toaster can be set up to use
either the front or rear toast eject
chute, however they can not be used
together. When using the rear eject
chute the rear hatch must be pushed
inward to open and clicked into place
before use.
For front eject the rear hatch must
be in the vertical/closed position.
Front toast eject
chute
WARNING: Ensure your toaster is
disconnected at the main power
supply and it has cooled down
before attaching or removing
the front toast eject chute.
•
Attach the chute by pushing the
curved end with hooked lip to the
back of the unit.
•
Adjust until the hooked lip is fixed
over the screws on the inside of
the toaster at the rear end.
Rear toast eject
chute
WARNING: Ensure your toaster is
disconnected at the main power
supply and has cooled down
before attaching or removing
the rear toast eject chute.
•
Push rear hatch inward to open
and click into place.
•
Attach the eject chute by hooking
the two cut outs on the side of the
chute over the two screws on the
back of the toaster.
A
‹
fi
¤
fl
⁄
›
‚
‡
·
77010 rev2:77010 rev3
15/10/08
10:49
Page 7
