SETTING THE 120MINUTE MINDER
The appliance is fitted with a 120minute timer. The timer does not control any function and
its sole purpose is to notify the user that their desired time has elapsed. To set the minute
minder, turn the timer control knob clockwise to your desired time. Once your set time has
finished a bell will sound.
Please note that the timer can be adjusted at any time by turning the control either
clockwise or anti-clockwise.
WARNING:
To avoid scalding, do not use loaded containers with liquids or cooking goods
which becomes fluid by heating in higher levels than can be easily observed.
Cleaning:
ALWAYS TURN OFF THE POWER SUPPLY AND REMOVE THE PLUG BEFORE
CLEANING. THIS OVEN IS NOT WATERPROOF. DO NOT USE A WATER JET SPRAY
TO CLEAN THE INTERIOR OR EXTERIOR OF THE OVEN, OR USE A WATER JET IN
THE VICINITY OF THE OVEN
Exterior
Clean with a good quality stainless steel cleaning compound. Do not use harsh abrasive
cleaners as this could damage the surface finish.
Interior
Ensure that the oven chamber is cool. Do not use wire brushes, steel wool or sharp
utensils. Clean the oven regularly with a good quality oven cleaner. Take care not to
damage the fan or the tube at the top of the oven which controls the thermostat.
Oven shelves
To remove, slide out to the stop position, raise the front edge up, and lift out. Clean with
hot water and detergent.
Oven door glass
To remove, slide out of slots in door. Clean with a good quality glass cleaner.
THERMAL CUTOUT
This can be checked by a competent person.
WARNING:ALWAYS TURN OFF THE POWER SUPPLY
BEFORE REMOVING ANY PARTS
.
Remove 14 screws from the back panel, and lift off the back
panel by unhooking the supporting tabs from the side panels.
To reset, press button in the centre of the cut-out. Replace the
back in reverse order.
RESET
