10
Controller Set Up
Touch Screen Display (filtered models only):
The LCD
screen will illuminate with the Burco logo.
The
default temperature and the time will flash waiting to be
set. The hour figure will flash. Use the scroll buttons
and press MENU to set when the correct time is shown.
To change default temperature, press UP/DOWN
SCROLL buttons to adjust to required temp.
Touch Screen Safety Lock:
Pressing and holding both the MENU and the UP
SCROLL button for 3 seconds activates the screen lock
function. When the Screen Lock function is active
settings cannot be changed. Press and hold the same
buttons to deactivate the screen lock function. If in
locked mode, the lock logo will blink on the screen for
a couple of seconds if any button is pressed.
Set Time:
Press MENU, SET CLOCK will be highlighted. Press MENU to enter the SET CLOCK menu. The time will be
displayed and the hour value will be flashing. Use the SCROLL buttons to select the correct value then press
MENU. The minute values will now be flashing. Use the SCROLL buttons again to select the correct values.
To store the time press MENU button again, this will also take you back to the SET UP menu. To exit the
SET UP menu press the STANDBY button.
Set Temperature:
Use the UP and DOWN buttons to adjust the temperature. Press and hold the UP or Down button for 3 seconds
before setting desired temperature.
UP
DOWN
STANDBY
MENU
STANDBY
SETTINGS
ECO MODE
