15
08/54070/0 (Issue 5)
Eco Mode (Filter models only):
When no water is drawn from the boiler in 2 hours, the eco mode is engaged. The backlight turns
off and
the only data displayed is the Burco logo along with the time and the status indicator. Water should be
drawn off to resume normal operation. To set the Eco mode timer, simply scroll down to ‘ON’ to set the
desired time. Once you are happy with the time that has been set, press the menu button to confirm this.
This will then take you to ‘OFF’, where you can then set the time that you want the Eco mode to finish. If
you want to turn the Eco mode off altogether, simply scroll down and select ‘OFF’.
TO EXIT MENUS, PRESS THE STANDBY BUTTON
Heating up:
HEATING will flash on controller screen during the heating up
period. LOW TEMP may be shown on the screen during this time.
When selected temperature is achieved
–
READY is shown.
Filling:
Once the INITIAL SET UP is complete, the filling process will
start. The LCD Screen will show the word FILLING. After the
filling is complete, the heating will start until it reaches the set
temperature. The LCD Screen will show the word HEATING.
Filter Life (Filtration models only):
During operation, the bars fill to represent filter usage. Once
exhausted, all the bars are solid and the fault code for changing
the filter is displayed. The unit should be powered down. Filters
replaced and filter counter reset (refer to replacement parts).
ECO MODE
SET CLOCK
SCREEN SETTINGS
LANGUAGE
