13
08/54070/0 (Issue 5)
8.3 Controller Set Up
Touch Screen Display (filtered models only):
The LCD
screen
will illuminate with the Burco logo.
The default temperature
and the time will flash waiting to be set. The hour figure will
flash. Use the scroll buttons and press MENU to set when the
correct time is shown. To change default temperature, press
UP/DOWN
SCROLL buttons to adjust to required temp.
Touch Screen Safety Lock:
Pressing and holding both the MENU and the UP-SCROLL
button for 3 seconds activates the screen lock function.
When the Screen Lock function is active settings cannot be
changed. Press and hold the same buttons to deactivate the
screen lock function. If in locked mode, the lock logo will
blink on the screen for a couple of seconds if any button is
pressed.
Set Time:
Press MENU, SET CLOCK will be highlighted. Press MENU to enter the SET CLOCK menu. The time will be
displayed, and the hour value will be flashing. Use the SCROLL buttons to select the correct value then
press MENU. The minute values will now be flashing. Use the SCROLL buttons again to select the correct
values. To store the time press MENU button again, this will also take you back to the SET UP menu. To
exit the SET UP menu, press the STANDBY button.
UP
STANDBY
ECO MODE
STANDBY
