11
Filter Paper Installatio
n
Install filter paper roll and then route the filter paper through the tractor drive as shown.
1. Pull the end of the paper roll up, and over
left roller
2. Pull end of paper between the Brew Funnel and
Brew Box
3. Continue paper over the top spindle, then on the
left side of the middle spindle. Feed the paper
in front of the pick-up (bottom) spindle with the
handle. Flip the handle a quarter turn to the left.
4. Pull the handle out as shown, and place the
paper in the slot that goes the length of the
pick-up spindle.
1
2
THE PAPER WEIGHT
MUST BE ON TOP OF
THE ROLL
5. With the paper inserted into the slot of the
bottom spindle, 1) push the spindle in, 2) then
down a quarter turn to the right.
NOTE: There are notches on the pick-up
spindle handle that need to be lined
up before pulling the handle down.
These notches hold the
handle in place when
the automatic paper
advance is in use.
INITIAL SETUP
1
2
3
5
4
continued >
