10
3. Position the drip tray as shown. When properly
placed, the drip tray fits up against the front legs
of the machine.
Waste Bin / Drip Tray
1. Remove the waste bin from the packaging, and
install as shown. A magnet is located on the
back of the bin.
NOTE: An optional through counter waste bin is
available for unattended sites.
2. Unpack the drip tray/cover. Remove the tape
securing the cover.
If setting up to have drip tray drain through
a counter, a hose will need to be attached.
Using a 3/8 inch drill bit, make a hole in the
extension on the back to the drip tray. Then
attach a 5/8 inch (inside diameter) hose with
a minumum rating of 200˚F. The hose needs
to flow downhill to work properly.
Suggested set-up if draining drip
tray through a counter.
3/8" hole drilled in extension, 5/8" hose
attached, and a 90˚ elbow connector to
ensure liquid flows downhill.
90˚ Elbow
Hose
Hose
Drip Tray
INITIAL SETUP
1
2
3
continued >
