Soft Heat
®
Brewer & Server
Use & Care Instructions
Slide the funnel into the
funnel rails of the brewer.
The display will read
NOW BREWING with the
remaining brew time.
The word DRIPPING will
read on the display.
Insert a BUNN filter into a
clean brew funnel.
For two hopper grinders,
select coffee type by
pressing “RIGHT” or
“LEFT” hopper.
If grinding fresh coffee,
place funnel in grinder.
Rotate server handle forward
to lock the lid. Place empty
server under the funnel.
Press the GRIND button to
fill the funnel.
Press and release the
“ENABLE BREW” button.
Press the Batch Size button
according to the amount of
coffee in the filter.
Press the assigned BREW
button (A, B, or C).
When dripping has stopped,
discard the used grounds
and filter. Rinse the funnel
and server after each use.
Gently shake funnel to
spread the grounds evenly.
If using pre-ground coffee,
simply pour fresh coffee
into filter.
Grasp sprayhead with a
clean sanitized cloth and turn
counter-clockwise to remove.
Disassemble and thoroughly
wash, rinse, and sanitize the
sprayhead. The holes must be
open and clear of any mineral
deposits.
Remove the sprayhead
by turning in a counter-
clockwise direction.
Wash hands and put
on single use gloves.
Re-assemble the
sprayhead and install
it onto the brewer.
Use the long end of the
sprayhead cleaning tool
to clean the sprayhead
outlet fitting.
Cleaning the Brewer
(WEEKLY)
Cleaning the Funnel
(DAILY)
Cleaning the Brewer (DAILY)
Brewing Coffee
Every Day: Clean the
spray head panel and the
entire outside surface of
the brewer with paper
towels and an approved
multi-surface cleaner.
Page 1 of 2
53431.0002 D 01/18
©2017 Bunn-O-Matic Corporation
Clean the funnel with wash
solution, rinse, and sanitize
for 60 seconds using an
approved sanitizer.