BUNN
®
practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
Dimensions & Specifications
Bunn-O-Matic
®
Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
Model
Product
Dispense Rate
Volts
Amps
Total
Capacity*
Cubic
Shipping
Cord
Number
1.7 oz. (.05L)
Watts
Measure
Weight Attached
Product Ratios
†
SLCA-7
38900.0305
20:1 - 50:1
120
15
1800
43 cups/hr.
10.9 ft
3
140 lbs.
Yes
208
23.7
5000
385 cups/hr.
.31 M
3
63.5 kg
No
240
23.7
5800
512 cups/hr.
No
†
Other ratios may be available based on tube options. Please contact your BUNN Sales Representative.
*Capacity measured with a 12 oz. (.35L) cup.
Power cord (NEMA 5-15P) 15 Amp-120V machine only. (30 Amp cord and plug needed for 208V and 240V models)
Electrical: 120V requires 2-wires plus ground service rated 120V, single phase, 60 Hz.
Plumbing: 20-100 psi
(138-689 kPa)
from a
1
/
4
" or larger supply line. Unit requires a 1 gpm
(3.79 lpm)
line flow capacity. A shut-off
valve should be installed in the line before the unit. Install a regulator in line when pressure is greater than 100 psi
(689 kPa)
to reduce pressure to 50 psi
(344 kPa)
. Supplied with
1
/
4
" male flare fitting.
01/14 © Bunn-O-Matic Corporation
