STEP 2
STEP 3
STEP 1
Clean all exterior surfaces
using a damp cloth rinsed
in any mild, nonabrasive,
liquid detergent.
STEP 5
Remove the hopper lid from
the hopper.
STEP 4
Remove the funnel with fil-
ter and discard any remain-
ing coffee grounds.
STEP 6
STEP 7
Remove the hopper by slid-
ing all the way forward.
49349.0000 122013
G9WD-RH GRINDER
USE & CARE INSTRUCTIONS
Clean and sanitize the hop-
per and lid. Care should
be taken not to scratch the
hoppers with any abrasive
material.
Replace the hopper and fill
with fresh whole bean cof-
fee. Replace the hopper lid.
Empty all beans from hop-
per. Plug in the grinder,
place funnel with filter into
funnel rails. Press and re-
lease the GRIND button.
Run a few cycles until all
coffee in the grind chamber
is dispensed and disconnect
the grinder from the power
source.
CLEANING
NOTE: Bunn-O-Matic recom-
mends the 3 step method for
cleaning and sanitizing the
server. The 3 step method
consists of hot soapy water
using an approved deter-
gent, a fresh water rinse,
and an aqueous sanitizing
solution using an approved
non-chlorine sanitizer.
