BUNN
®
practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
all dimensions shown in inches.
Dimensions & Specifications
Bunn-o-matic
®
corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • 800-637-8606 • 217-529-6601 • Fax 217-529-6644 • www.bunn.com
Model
Product #
Volts
Amps Tank Heater Total
Brewing
Cubic
Shipping
Cord
Watts
Watts Capacity
Measure Weight Attached
cWt15–3
††
12950.0112
120
13.9
1320
1670 3.9 gal./hr.
6.4 ft
3
32 lbs.
Yes
cWtF15–3 12950.0212
120
13.9
1320
1670 3.9 gal./hr.
6.4 ft
3
35 lbs.
Yes
cWtF15–3* 12950.0216
120
13.9
1320
1670 3.9 gal./hr.
6.4 ft
3
36 lbs.
Yes
cWtF20–3 12950.0232
120
17.9
1800
2150 5.3 gal./hr.
6.4 ft
3
35 lbs.
No
cWtF35–3 12950.0252 120/208-240 17.1
†
3500
3850 7.5 gal./hr.
6.4 ft
3
35 lbs.
No
cWtF15
12950.0298
120
13.9
1320
1670 3.9 gal./hr.
6.4 ft
3
35 lbs.
Yes
(3 left lower warmers)
cWtF35*
12950.0381 120/208-240 17.1
†
3500
3850 7.5 gal./hr.
6.4 ft
3
39 lbs.
No
*Stainless steel funnel
†
Current at 240 Volts
††
No faucet
Brewing capacity:
based upon incoming water temp of 60ºF/15˚C (140ºF/60˚C rise) per 1/2 gallon brew time of 4 minutes.
Models listed as 120/208V or 120/240V must be connected to 208V or 240V electrical service respectively. Please refer to the installation manual.
electrical: model 15 requires 2-wires plus ground service rated 120V, single phase, 60 Hz.
model 20 requires 2-wires plus ground service rated 120V, single phase, 60 Hz.
model 35 requires 3-wires plus ground service rated 120/208 or 120/240V, single phase, 60 Hz.
Plumbing: 20-90 psi (138-621 kPa). machine supplied with
1
⁄
4
" male flare fitting.
7/09 © Bunn-O-Matic Corporation