background image

Page 3

For technical questions, please call 1-800-444-3353.

Item 69644 

        

8. 

use eye protection.

 Wear ANSI-approved impact 

safety goggles when setting up this product.

9. 

maintain products with care.

 Keep the 

Solar Powered Security Light clean for better and 

safer performance. Inspect the Light periodically. 

If damaged, have it repaired by a qualified technician.

10. 

Do not overreach.

 Keep proper footing and 

balance at all times. If a ladder is to be used during 

installation, it should be supported by an assistant.

11. 

Do not set up the Solar powered Security light 

if under the influence of alcohol or drugs.

 Read 

warning labels on prescriptions to determine if your 

judgement or reflexes are impaired while taking 

drugs. If there is any doubt, do not set up the Light.

12. 

have your product serviced by a qualified 

repair person using only identical 

replacement parts.

 

This will ensure that 

the safety of the product is maintained.

13. WARNING: Handling the cord on this product’s 

Charger will expose you to lead, a chemical 

known to the State of California to cause cancer, 

and birth defects or other reproductive harm. 

Wash hands after handling.   

(California Health & Safety Code § 25249.5, 

et seq.

)

14. The warnings, precautions, and instructions 

discussed in this instruction manual cannot 

cover all possible conditions and situations 

that may occur.  It must be understood by the 

operator that common sense and caution are 

factors which cannot be built into this product, 

but must be supplied by the operator.

lithium Battery Safety Warnings

  

lithium BatteRieS StORe a 

laRGe amOunt OF eneRGY 

anD Will vent FiRe OR 

explODe iF miStReateD:

1. 

Keep Battery dry.

2. 

DO nOt DO anY OF the FOllOWinG 

tO the BatteRY:

a. 

Open,

b. 

Drop,

c. 

Short-circuit,

d. 

puncture,

e. 

incinerate, or

f. 

expose to temperatures greater than 140°F.

3.  Charge Battery only according to instructions.

4.  Do not use or charge battery if damaged.

 Save theSe inStRuCtiOnS.

Sa

Fet

Y

Ope

R

ati

O

n

m

aintenan

C

e

Setup

Summary of Contents for Bunker Hill Security 69644









Reviews: