Page 5
For technical questions, please call 1-888-866-5797.
Item 64910
5. Route the outlet box wires through a hole in the Base.
Place the Base against the outlet box.
6. Insert the Base Screw through the hole located
in the center of the Base, and thread it into
the center hole of the Bracket. Tighten the
Base Screw securely. Firmly pull on the Base
to verify it is securely attached to the Bracket.
Base Screw
Base
Bracket
Figure D
7. Connect the Wires to the terminals on the Base:
• Connect the black wire from the outlet
box to the “L” terminal on the Base.
• Connect the white wire from the outlet
box to the “N” terminal on the Base.
• Connect the grounding wire (usually green/
yellow insulation) from the outlet box to
the “GND” terminal on the Base.
• Carefully tuck excess wire length
back into the outlet box.
Base
Figure E
8. Align the bottom edge of the Light Fixture
with the bottom edge of the the Base. Tilt the
Light Fixture towards the Base, making sure the
Light Fixture is centered on the mounting base
and the pins within the light fixture align with the
terminal block. Secure with the Fixture Screw.
9. Push the Screw Cover firmly into
the fixture screw hole.
Fixture
Screw
Light Fixture
Base
Screw
Cover
Figure F
10. Caulk around the Base and mounting surface
with silicone sealant (not included).
