Page 19
For technical questions, please call 1-800-444-3353.
Item 61229
Sa
FE
tY
O
PER
ati
O
n
nE
tWOR
k
SE
ttin
GS
Motion Detection Settings
4
motion Detection
alarm > motion
Set up parameters for triggering
recordings by Motion Detection.
Figure O
1.
Channel:
Select Channel.
2.
Enable:
Select
Enable
or
Disable
.
3.
area:
Click to set area where motion is detected.
4.
Sensitivity:
Set sensitivity level.
5.
Show message:
Check box to show message
on screen when Motion Detection is triggered.
6.
Buzzer:
Check box to hear audible alarm
when Motion Detection is triggered.
7.
Send Email:
Check box
to have email sent
when Motion Detection is triggered.
note:
The DVR must be connected to the
Internet for this function to work. (
See
Wide
area network (Wan) Setup on page 30).
8.
Full Screen:
Check box so that when
Motion Detection is triggered, the Camera’s
view will display in full screen mode.
9.
Record Channel:
Check box to Enable/Disable
motion recording. Highlight Channels to link
recording to this Channel's motion alarm.
10.
Post Recording:
Select how long recording will
continue after motion is no longer detected.
11.
Copy:
Copy parameters from one
Channel to other Channels.
a. Select Channel to copy from.
b. Select Channel to copy to or select
all.
c. Click
Copy
, then click
Ok.
Changes will not be saved unless
you click apply then Ok!
Click Exit to return to System and
discard unsaved changes.