Manual-SMT 3000 ECO LIGHT Plus-en
page 11 / 18
Function description
Picking up a component
First, make sure that the vacuum pump is switched on and that there is vacuum on the pipette. Take the ma-
nipulator head, close the vacuum hole with your finger and guide the pipette to the component feeder.
Pull the head down so that the pipette only slightly touches the component and suck in the corresponding
component. Depending on the size, the component is sucked in when it is touched, or small components are
drawn to the pipette by the vacuum just before touching it. Use the knurled screw to turn the component in
the direction to be assembled.
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]
