hellas-manual-en
Page 2 / 9
Leaflet
Precision vacuum exposure unit for double-sided contact exposure of photocoated base material,
print films and more.
Features:
•
Equipped with 2 x 6 piece super actinic fluorescent tubes of 18 W, mounted on a special
reflector on each side
•
Crystal cut glass 8 mm, mounted without tension above the lower exposure area
•
Exposure area approximately 570 x 300 mm
•
Integrated maintenance-free high performance vacuum (+60%), with display unit
•
Special vacuum foil, textured, for uniform, void-free contact
•
milky vacuum foil for clichee application optional
•
digital timer (1 second - 99 minutes) with count-down, auto-reset and end signal function
•
Control of light emission with a front-mounted amperemeter
•
Low-noise cross-flow fan to cool the lower exposure level, enables continuous operation
•
Exposure levels separately selectable via front-mounted illuminated switches
•
Maintenance-free all-steel construction
•
cover safety switch optional
Applications:
With the vacuum Hellas unit you can process all photosensitive products with spectral sensitivity in
the near UV range (360-400nm). These are especially positive or negative photo-coated pcbs,
printing plates made of nylon, aluminum, steel and diazo and transfer films.
Options:
Quick release button for vacuum
Cover safety switch
Technical Data
Hellas Z
Hellas E
Hellas XL
Hellas XL E
Dimension
(BxHxT):
620 x 650 x 240
mm³
620 x 650 x 240 mm³
680 x 650 x 240mm³
680 x 650 x 240mm³
Weight:
ca. 40 kg
ca. 40 kg
ca. 45 kg
ca. 45 kg
Electrical
connnection:
230 V / 50 Hz, ca.
800 W
230 V / 50 Hz, ca. 600 W
230 V / 50 Hz, ca. 850 W
230 V / 50 Hz, ca.
650 W
Max. exposure
size:
ca. 570 x 300 mm²
ca. 570 x 300 mm²
585 x 320 mm² optional
365x 575mm²
365x 575mm²
Number of tubes
2 x 6
1 x 6
2 x 7
1 x 7
Amperemeter
Yes
No
Yes
No
Technical changes reserved
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]
