Version 1.1
Page
1
of
4
© 3A Trade, Ltd.
Installation Instructions – XT1200Z
Super Tenere Pannier Rack
Thank you for purchasing a BUMOT luggage system for your motorcycle. BUMOT luggage is handcrafted in Bulgaria and is
designed for the rider who demands the most durable and functional luggage for their adventure touring. We’re confident
you will enjoy your new luggage system for years to come.
Please read through these instructions completely before starting installation. Leave all hardware loose until all components
are in place and initial assembly is completed. Once everything has been installed, tighten all bolts snugly. Do not apply liquid
threadlock (LocTite or similar) to any bolt which has a self-locking nut.
Installation Hardware Contents -
M10-1.25 x 80mm Bolts – Qty 4
M10 Washer – Qty 4
M8 x 40mm Bolt – Qty 1
M8 Washer – Qty 1
M8 Self-Locking Nut – Qty 1
M6 x 25mm Bolts – Qty 2
M6 Washers – Qty 4
M6 Self-Locking Nuts – Qty 2
28mm Spacer – Qty 2
15.5mm Spacer – Qty 2
Instructions -
1. Remove the two bolts and spacers from the factory Yamaha pannier mounts (if equipped) and remove the mount. Do
the same on the opposite side. Retain the original factory washers as they will be reused.
