15
Installing the RFI intake:
1. Place the Bully Dog RFI bottom into the engine bay over the spot where the stock filter
housing plate was originally placed, with the RFI MAF tube still installed.
*Using three of the 10mm bolts that Bully Dog supplied, secure the RFI
bottom to the inside of the engine bay.*
IMPORTANT: Do not over-tighten the screws, as this could damage the Bully Dog intake.
2. Install the Stage 2 air intake tube assembly. Move couplers so that the connections are
equal on either side of the couplings before tightening the clamps. Tighten the band clamps
when everything is installed correctly.
RFI Installation
