23
8. Slide the pod over the stock A-pillar until they line up.
a. If there is a speaker on the
A-pillar, make sure that
the speaker in the pod is
placed directly over the
speaker wire.
9. Reconnect the speaker wire.
10. Route all wiring down along the side of the dash.
11. Firmly press down on the parts of the pod mount where
the adhesive tape touches the stock A-pillar for a
secure attachment.
12. Re-secure the weather stripping.
Optional Permanent Installation Steps:
13. Drill one hole on the top part of the pod.
a. Use a 13/64” drill bit.
b. Drill underneath the weather stripping facing out of
the driver’s side door.
14. Place a plastic rivet in the hole to ensure a good fit and
finish.
Additional holes may be drilled if needed.
Position Pod
