18
INSTALLATION
FOR A ClEAN INsTAll INTO ThE FUsE lOCATIONs:
There are multiple different fuse types in OEM vehicles. For a clean install, use a fuse tap and
spade connector that will work with the specific fuse being used for this install.
1. Once the end of the power wire is near the fuse box, prepare the end of the power wire by attaching
a spade connector to the end of the wire.
2. Remove the correct fuse from its location and then replace that fuse with a fuse tap that is made
for that size of fuse.
3. Connect the spade connect to the end of the fuse tap.
4. Use zip ties to secure any loose wire left hanging from excess slack in the power wire.
