INSTALLATION
17
step 2:
COnneCt the pOwer wire tO the vehiCle fuse bOX
Step two involves locating the correct fuse within the vehicle fuse box, and connecting the power
wire from the OBD ll Adaptor plug to the fuse in the fuse box.
IDENTIFy ThE CORRECT FUsE:
1. Locate the vehicle fuse box; the vehicle owners manual will indicate where the fuse box is located
within the vehicle.
2. Open the fuse box and identify a fuse that has “key on power.” To identify the correct fuse, find an
accessory fuse using the fuse diagram in the vehicle owners manual. If the vehicle manual does not
help identify an accessory fuse use a voltage meter to identify a fuse that supplies power only when
the key is in the on position.
CONNECT ThE pOWER WIRE FROm ThE ObD II blOCk TO ThE CORRECT VEhIClE FUsE:
1. Connect the power wire to the power wire port on the OBD ll Adaptor plug.
2. Run the raw end of the power wire to the vehicle fuse box, in many cases this will mean taking the
power wire through the vehicle fire wall. On most vehicles the power wire can run through an exist-
ing port, it is not necessary to drill.
3. Remove the correct fuse from the fuse box and plug the fuse back into its original location along
with the power wire. For a the cleanest install see our clean install instructions on the next page.
GT & Windshield Mount
OBDII Adapter Plug
OBDII Port
Power Cable
Fuse Box
Fire wall grommet
