Bulls E-Stream Evo 45 AM G 18 Maintenance And Operating Instructions Download Page 98

Page: 98 / 139

34-03141_1.0_11.06.2018

Operation



Straighten the quick release lever and use two
fingers to fasten the quick release. Move the quick
release lever horizontally into the closed position.



The quick release is now fastened. The lever is
sufficiently fastened if the lever leaves an
impression on your hand.

Figure 35:

Moving the quick release lever horizontally into the closed position

Crash caused by adjusted quick release

The axle may come loose if the closed quick release is
turned. This will result in a crash and injuries.



Never adjust or turn a quick release after closing it,
e.g. to correct the final position.

CAUTION

EN 034-03141_0.01_09.18_BULLS BROSE_45_MY18.book Page 96 Monday, June 11, 2018 1:14 PM

Summary of Contents for E-Stream Evo 45 AM G 18












































































































































Search results

Summary of Contents for E-Stream Evo 45 AM G 18

Reviews:

Related manuals for E-Stream Evo 45 AM G 18

Brands by name

Popular brands

Bulls E-Stream Evo 45 AM G 18, Maintenance And Operating Instructions

Search results

Summary of Contents for E-Stream Evo 45 AM G 18

Reviews:

Related manuals for E-Stream Evo 45 AM G 18

Brands by name

Popular brands