47
Transportation, storage and assembly
5.3
Assembly
ü
If a fitting stand is used, it must be approved for a
weight of
at least
66 lbs
.
ü
To reduce the weight, we recommend that you always
disconnect the battery from the bicycle for the duration
of use of the fitting stand.
ü
Universal tools, a torque
wrench
with an operating
range of 5
Nm to 40
Nm and the special tools, as
recommended by
BULLS
, must be available.
5.3.1
Unpacking
The packaging material consists mainly of cardboard
and plastic film.
Crushing caused by unintentional
activation
There is a risk of injury if the drive system is activated
unintentionally.
Remove the battery if the battery is not absolutely
necessary for assembly.
ü
Assemble the bicycle in a clean and dry environment.
ü
The working environment should have a temperature
of 59°F - 77°F.
Working environment temperature
59°F - 77°F
Table 23:
Working environment temperature
CAUTION
!
Hand injuries caused by cardboard packaging
The shipping carton is closed with metal staples. There
is a risk of puncture wounds and cuts when unpacking
and crushing the packaging.
Wear suitable hand protection.
Remove the metal staples with pliers before the
shipping carton is opened.
CAUTION
!
BULLS_BOSCH_Purion_BBC
Page 47
