105
Maintenance
8.4.2.6
Clamping version V
Push the axle into the hub from the left until it
meshes in the thread on the right-hand fork end.
Figure 40:
Wheel quick release, version V, with twist knob (1) and clamping
lever (2)
Flip the quick release lever into the recess.
Figure 41:
Flipping the quick release into the recess (1)
Crash caused by unfastened quick release
The clamping force of the quick release lever is set
once during assembly and is not an indication that the
wheel axle is sufficiently fastened. The axle may come
loose if the closed quick release is turned. This will
result in a crash and injuries.
Never adjust or turn a quick release after closing it,
e.g. in order to correct the final position.
CAUTION
!
1
2
1
BULLS_BOSCH_Purion_BBC
Page 105
