MY21B05 - 12_1.0_21.10.2020
74
Operation
6.15.6.9 Adjusting the start gear
Only applies to pedelecs with this
equipment
It is only possible to adjust the gear shift if using
an electronic gear shift.
The
settings menu
is opened.
1
Press
switch X
or
switch Y
until LIGHT is
highlighted.
2
Press the
button (display)
or
switch A
.
The start gear settings menu appears.
Figure 83: Start gear settings menu
There are two selection options:
3
Press
switch X
or
switch Y
until the desired
function is highlighted.
4
Press the
button (display)
or
switch A
.
The start gear has been changed. The settings
menu is displayed.
6.15.6.10Changing level of assistance
The ride comfort of the pedelec depends on the
maximum torque of the drive unit and how much
drive force is applied when pedalling. The
Shimano drive system has several recommended,
registered settings that can be changed as
desired. The settings can be adjusted to individual
requirements. Depending on the setting, the
battery consumption may increase and the
supported travel range may be considerably
reduced.
Details of the settings can be read in E-TUBE
PROJECT. For details, see the service
instructions in E-TUBE PROJECT.
The
settings menu
is opened.
1
Press
switch X
or
switch Y
until ADJUST
LEVEL OF ASSIST. is highlighted.
2
Press the
button (display)
or
switch A
.
The level of assistance settings menu appears.
There are two selection options:
3
Press
switch X
or
switch Y
until the desired
function is highlighted.
4
Press the
button (display)
or
switch A
.
The levels of assistance have been changed.
The settings menu is displayed.
[1], [2], ... Select start gear *3
OFF
No start gear
*3 Your specialist dealer can adjust a start gear up
to the maximum gear level on the gear shift
mounted on the pedelec.
PROFILE 1
Change the level of assistance
using the values stored in Profile 1
PROFILE 2
Change the level of assistance
using the values stored in Profile 2
