RM4210 Wiring Guide
January 2019
10
1.
Make note of the size of the CP-protected coupon (
Protected Cpn 1
in the wiring diagram). This
data will be entered in Bullhorn Web using the following steps:
a.
Go to the Unit Setup page for the unit.
b.
Under
Settings
, enter the CP-protected coupon size in the
Test Coupon Size
field.
Figure 1-3. Unit Setup for Test Coupon Settings
NOTE:
Remove any switch or jumper on the test station head that is used to connect the CP-protected
coupon (AC Coupon or Test Coupon) to the Structure, where the CP-protected coupon is used to
measure AC current density or instant off.
