User Guide
RM4210 Wiring Guide
This document is to help technicians plan and install an RM4210 remote monitoring unit based on the
type of measurement that will be taken from a test station. Wiring instructions are included for each
type of measurement, coupons, or other components that may be included in the set up. Refer to the
following figure for an example of test station connections.
Different test stations may have different connection configurations or labels. The following example is
based on a Triton test station.
Figure 1-1. Test Station Connections
RM4210 Input Limits
The RM4210 has the following input limits, which should be observed to prevent damage to the unit:
l
The input voltage measurement should not exceed
100V AC or DC
.
l
The input amperage, for AC and DC current density, measurement should not exceed
0.2A AC or
DC
.
