Bullhorn RM2000 Series, Installation And Configuration Manual

Page: 69 / 82

RM2000 Series Installation and Configuration Guide
Glossary 61
GPS Information Information field showing unit GPS and
elevation coordinates. Antenna Status applies to
the magnetic-mount antenna, and Number of
Satellites Tracked applies to the SkyWave
satellite terminal.
HI, HI Rpt, LO, LO Rpt Abbreviations for alarm labels high, high repeat,
low, and low repeat respectively.
IMEI International Mobile Equipment Identity.
Unique number assigned to the digital cellular
radio by the manufacturer for identification
purposes.
Input Shows the last reading received by input
channels 1-6 (Ch1-Ch6). If an input channel is
configured in analog mode, the reading is the
actual raw value received by the input channel.
If the input channel (5 or 6) is configured in
digital dry contact mode, the reading is either
Closed or Open depending on the reading
received by the input channel. If the input
channel is configured in active digital mode, the
reading is either HI or LO depending on the
reading received by the input channel.
International Gateway Identifies Gateway Control Center (GCC) used
by unit for communication with ORBCOMM
satellite network.
LED Light Emitting Diode. Status indicator.
Modbus Comm Settings Modbus Communication Settings. Settings
based on the communication protocol of the
input device, such as RTU and ASCII. This field
only applies to SDT16 unit types.
Persistence Persistence is the number of samples an input
channel must complete while in a particular
state before that state is recognized as an alarm.
For example, if an input channel is set up with a
high alarm and a persistence value of 5, the
input channel must complete 6 samples in a
high state before it is recognized as a high alarm.
Table D-1. Glossary of Technical Terms (continued)
Term Definition