Bullhorn RM2000 Series, Installation And Configuration Manual

Page: 66 / 82

RM2000 Series Installation and Configuration Guide
58 Optional Equipment
2 If you are working with a unit that uses the ORBCOMM satellite network
such as the RM2020, complete the following steps to recharge the battery:
a Plug the battery charger cable in the battery charger connector on the
bottom of the enclosure. See Figure 2-1 on page 14.
b Connect the other end of the battery charger cable to the AC battery
charger in the following manner:
• Connect the black wire to the negative ( – ) terminal on the AC
battery charger. Secure wire using one (1) screw set aside earlier in
step
1 .
c Plug the AC battery charger in a 120 VAC power outlet.
The AC Battery Charger installation is now complete.