BulletHD LITE2, Manual

Page: 6 / 13

Take a Video
To take videos with the Bullet HD, make sure that the Video/Photo switch
④
is set to
the right for video mode. Turn on the Bullet HD by pressing the Power button
②
.
Press the Power/Shutter button ② shortly to start a video recording. The red LED
will blink while the video is recording. Press the Power/Shutter button
②
again to
stop recording.
Take Still Pictures
To take still pictures with the Bullet HD, make sure that the Video/Photo switch
④
is
set to the left for photo mode. Turn on the Bullet HD by pressing the Power button
②
.
Press the Power/Shutter ② button to start taking photos, the red LED will blink.
Press the Power/Shutter button
②
again to stop taking photos and to go back to the
standby mode.
In photo mode the Bullet HD will take
sequentially
photos every 3 seconds. It stops
automatically if the battery is empty or if the micro SD card is full.
Playback On Your Computer
Screw the rear cap ③ , power on the BulletHD, connect with your computer via USB
cable from the USB port
⑤
. The camera will be recognized automatically as USB
Device. Or you can take out the micro SD card and use your own card reader to
connect with your computer too.