7
5. When using a micro SD memory card, there should be no
DATA
from other devices on the card. If you are using a
micro SD memory card for the first time in the BIKER MATE,
you should first format (FAT32) the card in your computer.
It is recommended to use Class 6 or above.
Charging The Battery
There is built-in
Li-Po (Lithium-Polymer)
battery inside the
BIKER MATE. The RED color charging LED turns ON while
charging, goes OFF when the battery is fully charged. The
BLUE color LED flashes when battery power is low. The
internal battery is normally charged when motorcycle engine is
running via the Power Converter. The internal camera battery
can also be charged with an external mains supply 5V adapter
or a power bank with a minimum rating of 2A. During charging,
the camera is automatically switched ON and has to manually
switch OFF for faster charging.
Engine Start Mode / Ignition (ACC) Start Mode
Turn
BIKER Camera
ON
Turn
BIKER Camera
OFF
Once the Power Converter is installed on your bike,
BIKER MATE starts REC after Ignition is started.
When you cut OFF the Ignition, it stops recording and
saves the recorded files automatically without pressing
any button.
