Bulldog Security PRO-SERIES 5002 Installation And Owner'S Manual Download Page 2

SYSTEM FEATURES

1

2 Long Range Four-Button Remotes Hand-held, easy to use and lets you operate the system from an extended distance.

Keyless Entry with onboard relays Two onboard relays are provided to work any vehicle’s door locks without additional parts. This

feature will remotely lock or unlock your power door locks even if the engine is running or

the alarm is in valet mode.

Trunk Release

Remotely opens your trunk with a single push of a button.

Remote Car Finder

Locates your vehicle by chirping the siren and flashing the vehicles lights when activated by

the transmitter (i.e. crowded parking lots, etc.).

Instant Personal Panic

Provides instant panic protection by sounding the siren and flashing lights while inside or

Protection

outside the vehicle, even if the engine is running.

Starter Immobilizer Output 

Prevents a thief from starting your vehicle when your system is armed, even if he or she has

your keys. (Optional Part #773 required)

Distracted Entry

In passive arming mode, if you disarm the system and get distracted from entering the vehicle,

the system automatically rearms itself in one minute, whether the doors have been opened or

not.

Valet

Prevents passive arming when being serviced, valet parked or washed. While in valet mode, you

can still remotely lock and unlock the power door locks and access instant panic from your

transmitter (remotely programmable).

Dome Light

Never walk up to a dark vehicle again. When disarming the vehicle by remote control, the dome

light will come on and stay on for 30 seconds, or until you activate the ignition switch.

Active Arming

System arms only when the transmitter button is pressed.

Passive Arming

Automatically arms the system 1 minute after the last door is closed. Lowers car insurance in

most states (remotely programmable).

Silent Arming

The system will perform all its functions without the  chirping sound when arming and disarming

the system.

Pre-Arming Chirps to Passive

Warns you that your alarm will arm itself in 30 seconds (Patented).

Arming

Progressive Warning

Sounds pre-alarm warning chirps when a shock sensor or door switch is triggered. These chirps

remind you to disarm the system before the siren goes to full activation.

Locking and Unlocking with the

The doors will lock when the ignition is turned on and unlock when the ignition is turned off

Ignition Switch

(remotely programmable).

Automatic Annoyance

If the same zone is violated 3 times while armed, that zone will turn off until the alarm is

Override

disarmed and rearmed.

6 Tone 126db Siren

Attracts more public attention by changing its tone every 6 seconds.

Current Sensing

Detects any voltage reduction in the vehicle caused by an interior dome light, hood or trunk

light coming on (remotely programmable).

Plug In 8 Function LED Status

A visual theft deterrent flashes when the system is armed. It also lets you know which zone

Indicator

has been violated, and provides a visual reference to indicate if it is armed or in valet mode.

On-Board Parking Light Relay

Built in relay provides a positive (+) parking light output. No external relay needed.

Ignition Detection

Adds protection by sounding the siren and flashing the lights if the ignition wire is hot-

wired or turned on when the system is armed, even if the current sensor or door switch wires

have been cut.

Computer Controlled Fan

No additional wiring needed. This model distinguishes between an electric fan turning on and

Sensor Override

a light bulb.

Code Learning

Allows your alarm to learn new remotes, should you want to add remotes, or if remotes are lost.

E Squares Memory Back Up

The system memorizes its programmed features if power is lost.

Limited Lifetime Warranty 

Guarantees life-long protection.

Summary of Contents for PRO-SERIES 5002












Reviews: