INSTALLATION PROGRAMMING INSTRUCTIONS
OPERATOR PROGRAMMING INSTRUCTIONS
11
Programming Double Crank Time
Press and hold the brake, then press and hold Button #3 (trunk) until the parking lights flash three (3) times. Release
Button #3. Press and release Button #3, the parking lights will flash once. The Double Crank is on. Press and release Button
#3, the parking lights will flash twice, Double Crank is now off. Release the brake, the parking lights will flash three
(3) times, the programming is now entered. NOTE: Factory setting is Double Crank off.
Programming Door Lock Pulse Length
Press and hold the brake, then press and hold Button #3 (trunk) until the parking lights flash three (3) times. Release
Button #3. Press and release Button #1, the parking lights will flash once, the door lock pulse length is now 3.5 seconds.
Press and release Button #1, the parking lights will flash twice, the door lock pulse length is now .7 seconds. Release the
brake, the parking lights will flash three (3) times. The programming is now entered. NOTE: Factory Door Lock Pulse Setting
is .7 seconds.
Programming Double Pulse Unlock Output (Factory Security Shutdown)
Press and hold the brake, then press and hold Button #4 (stop) until the parking lights flash four (4) times. Release Button
#4. Press and release Button #3, the parking lights will flash once. Double Pulse Unlock is on. Press and release Button
#3, the parking lights will flash twice. Double Pulse Unlock is now programmed off. Release the brake, the parking lights
will flash three (3) times. The programming is now entered. NOTE: Factory Setting is Double Pulse off.
WE RECOMMEND THAT YOU USE FACTORY SETTINGS FIRST
ENTERING PROGRAMMING MODE
Make sure your vehicle is not running and the brake is pressed. The brake is to remain pressed as long as you want to
remain in programming mode. The unit will exit the programming mode simply by releasing the brake. The parking lights
will flash three (3) times confirming that you are out of programming mode.
Programming Tach/Tachless Start
Press and hold the brake, then press and hold Button #3 (trunk) until the parking lights flash three (3) times. Release
Button #3. Press and release Button #4, the parking lights will flash once. The unit is now in Tachless Start Mode. Press
and release Button #4, the parking lights will flash twice. The unit is now in Tach Start Mode. Release the brake, the
parking lights will flash three (3) times. The programming is now entered. NOTE: Factory setting is Tachless Start Mode.
Programming Diesel Start
Press and hold the brake, then press and hold Button #4 (stop) until the parking lights flash four (4) times. Release Button
#4. Press and release Button #1, the parking lights will flash once. The unit is now programmed for Diesel Start Mode. Press
and release Button #1, the parking lights will flash twice, Diesel Start Mode is now off. Release the brake, the parking
lights will flash three (3) times. The programming is now entered. NOTE: Factory setting is Diesel Start off.
Adding New Transmitters
Press and hold the brake, then press and hold Button #1 (start) until the parking lights flash once. Release Button
#1. Press any button on the new remote, the parking lights will flash three (3) times, the new remote is now programmed.
Programming Lock with Brake, Unlock with Ignition Off
Press and hold the brake, then press and hold Button #3 (trunk) until the parking lights flash three (3) times.
Release Button #3. Press and release Button #2, the parking lights will flash once. The unit will now lock with the
brake and unlock when the ignition is turned off. Press and release Button #2 again, the parking lights will flash
twice. The Lock with Brake feature is now turned off. Release the brake, the parking lights will flash three (3)
times. The programming is now entered. NOTE: Factory setting is Lock with Brake off.
Trunk Pop Output
The remote car starter includes an optional output that can be used to do one of the following: open the
trunk (optional relay required), roll up the windows (optional module needed), close the sun roof (optional
module needed) etc. This output will pulse .75 seconds when pressed and released. In instances where a
continuous signal is needed such as sun roof and power windows, hold down Button #3 (trunk) as long as
the signal is needed to complete the task. The parking lights will remain on as long as this button is
being pressed.
Remote Car Finder (Armed Only)
When the unit is armed, press and release Button #4, the horn or siren will chirp three (3) times and
the parking lights will flash three (3) times.
Runtime Confirmation (Disarmed Only)
With the engine off, press and release Button #4 (stop). The parking lights will begin to flash, each
flash represents the programmed runtime. Example: 5 flashes = 25 minutes.
