HOW TO USE YOUR REMOTE TRANSMITTER
10
CONNECTING DOOR LOCKS
“Type A” (+) Positive (5-pin harness)
NOTE: Connect the RED WITH
BLACK STRIPE wire to +12V
constant fused at 30 amps.
UNLOCK
LOCK
GREEN/BLACK Unlock
GREEN/WHITE Not Used
RED/BLACK
BLUE/BLACK Lock
BLUE/WHITE Not Used
KEYLESS MODULE
+12V Constant
FUSE
“Type B” (-) Negative (5-pin harness)
Ground
UNLOCK
LOCK
GREEN/BLACK Unlock
GREEN/WHITE Not Used
RED/BLACK
BLUE/BLACK Lock
BLUE/WHITE Not Used
KEYLESS MODULE
NOTE: Connect the RED WITH
BLACK STRIPE wire to ground.
FUSE
“Type C” Reverse Polarity (5-pin harness)
NOTE: You will need to cut factory wiring to make an end to
end connection, see “Making Connections” on pages 3-4.
POWER
DOOR
LOCK
MOTOR
LOCK
UNLOCK
GREEN/BLACK Unlock
GREEN/WHITE Unlock
RED/BLACK
BLUE/BLACK Lock
BLUE/WHITE Lock
KEYLESS MODULE
+12V
Constant
FUSE
NOTE: Connect the RED WITH BLACK STRIPE wire
to +12V constant power fused at 30 amps.
BULLDOG
Start
Arm
Disarm
Trunk
Stop
Starting the Vehicle with the Remote Transmitter
Press and release button #1 (start). The parking
lights will flash once, confirming the car starter
received the signal. The car will then start and
the parking lights will turn on and remain on
while the vehicle is running. To shut off the
engine before the preset time, press button #4
(stop) or press the brake pedal or when the hood
is opened. NOTE: If your car does not start on
the first crank it will automatically attempt
to start up to 2 more times. (only in tachless
mode) In tachless mode, parking lights will wait
approximately 10 seconds before turning on.
BUTTON #1
Remote starts your vehicle
from up to a quarter mile away.
BUTTON #2
Arm locks and disarm unlocks
your power door locks.
BUTTON #3
Pops your trunk.
BUTTON #4
Turns off your remote starter and helps
you locate your car (when system is
armed).
Pit Stop: Exiting the Car with the Engine Running
Make sure the transmission is in park and press button #1 (start) before turning the ignition switch off.
(The engine will remain running for the preset time.)
Keyless Entry Operation
Press button #2 (lock/unlock), the parking lights will flash once and the doors will lock. Press button
#2 again, the parking lights will flash twice, the doors will unlock, and the parking lights will remain
on for one minute or until you turn the ignition on or press the brake.
Dome Light Supervision Option
The remote starter includes an optional output that can be used to illuminate the dome light when pressing
button #2 and unlocking your power door locks. The dome light will remain on for one minute or until you
turn the ignition
on or press the brake.
